Answering A Call; Incoming Call Features - Motorola FR68 Series User Manual

inserted. Your service provider can program additional emergency numbers into your SIM card.
However, your SIM card must be inserted in your phone in order to use the numbers stored on it. See
your service provider for additional information.
When the alpha-numeric keypad phone is locked, press the Orange key twice to set the keypad to
numeric mode and then enter the emergency number.
NOTE Emergency numbers vary by country. Your phone's pre-programmed emergency number(s) may not
work in all locations, and sometimes an emergency call cannot be placed due to network,
environmental, or interference issues.

Answering a Call

A dialog box appears on the FR68 Series when it receives an incoming call. If the phone is set to ring,
a ring tone sounds. Answer or ignore the incoming call.
To answer an incoming call tap Answer on the Phone - Incoming dialog or press the green phone
key on the FR68 Series keypad.
Figure 6-10
To ignore the incoming call tap Ignore. This may send the caller to voice mail, depending on the
service provider. Otherwise, this presents busy signal to the calling party.
To end the call, tap End or press the red phone key on the FR68 Series keypad.

Incoming Call Features

If you receive a call while in a call, tap Wait to place the call in call waiting.
You can use other programs on the FR68 Series during a call. To switch back to Phone, tap
Talk or tap Start >Phone. Tap End to end the call.
If a caller isn't in your contact list, create a contact during the call or from Call History by tapping
Menu >Save to Contacts.
To terminate a call when a second call comes in and answer the waiting call, tap End on the
Phone keypad to disconnect the active call, then tap Answer or press the Send key to answer
the waiting call.
To hold the current call and answer a waiting call, tap Answer or press the Send key to place
the current call on hold and answer the incoming call.
To put a call on hold to call another number or answer an incoming call, tap Hold on an FR68
Series . To move from one call to another, tap Swap on an FR68 Series.
Incoming Call
81
Using the Phone