Motorola FR68 Series User Manual page 125

Table 9-1
Problem
Rechargeable
Lithium-ion
battery did not
charge.
Cannot see
characters on
display.
During data
communication,
no data
transmitted, or
transmitted data
was incomplete.
No sound.
FR68 Series shuts
off.
Troubleshooting the FR68 Series (Continued)
Cause
Battery failed.
FR68 Series
removed from
cradle while battery
was charging.
Extreme battery
temperature.
FR68 Series not
powered on.
FR68 Series
removed from cradle
or disconnected from
host computer
during
communication.
Incorrect cable
configuration.
Communication
software was
incorrectly installed or
configured.
Volume setting is
low or turned off.
FR68 Series is
inactive.
Battery is depleted.
Battery is not
inserted properly.
Maintenance & Troubleshooting
Solution
Replace battery. If the FR68 Series l does not operate,
Resetting the FR68 Series on
perform a cold boot. See
Page 37.
Insert FR68 Series in cradle. The 3600 mAh battery i s
fully charged in approximately six hours.
Battery does not charge if ambient temperature is below
0°C (32°F) or above 45°C (113°F).
Press the Reset button.
Replace the FR68 Series in the cradle, or reattach
the communication cable and re-transmit.
See the system administrator.
Perform setup.
Adjusting Volume on Page
Adjust the volume. See
The FR68 Series turns off after a period of inactivity. If
the FR68 Series is running on battery power, set this
period from 1 to 5 minutes, in one-minute intervals. If
the FR68 Series is running on external power, set this
period to 1, 2, 5, 10, 15, or 30 minutes.
Check the Power window by selecting
System
tab and tapping the
Advanced
tab and change the setting for a longer delay
before the automatic shutoff feature activates.
Replace the battery.
Insert the battery properly. See
on Page 18.
123
33.
>
Start Settings
>
Power
icon. Select the
Installing the Main Battery