Battery Management; Changing The Power Settings; Changing The Backlight Settings - Motorola FR68 Series User Manual

Battery Management

Observe the following battery saving tips:
The FR68 Series factory default settings for the WWAN and WLAN radios are set to ON.
NOTE
Leave the FR68 Series connected to AC power at all times when not in use.
Set the FR68 Series to turn off after a short period of non-use.
Set the backlight to turn off after a short period of non-use.
Turn off all wireless activities when not in use.
Power off the FR68 Series when charging to charge at a faster rate.

Changing the Power Settings

To set the FR68 Series to turn off after a short period of non-use:
1. Start
Tap
Select the On battery power: Turn off device if not used for check box and select a value
2.
from the drop-down list.
Select ok.
3.

Changing the Backlight Settings

To change the backlight settings in order to conserve more battery power:
1. Start
Tap
Select the Turn off backlight if device is not used for check box and select a value from the
2.
drop-down list.
3.
Select the
4.
se the slider to set a low value for the backlight.
U
Select ok.
5.
Settings System Power
> > tab >
Settings System Backlight
> > tab >
Brightness
tab.
icon >
Advanced
tab.
icon >
Power
tab.
23
Getting Started