Single Slot Usb/Serial Cradle - Motorola FR68 Series User Manual

Motorola fr68 series mobile computer user guide
Hide thumbs Also See for FR68 Series:
Table of Contents

Advertisement

Single Slot USB/Serial Cradle

Table 9-3
Symptom
LEDs do not
light when FR68
Series or spare
battery is
inserted.
FR68 Series
battery is not
charging.
 
 
Troubleshooting the Single Slot USB/Serial Cradle
Possible Cause
Cradle is not
receiving power.
FR68 Series is not
seated firmly in the
cradle.
Spare battery is not
seated firmly in the
cradle.
FR68 Series i s
removed from
cradle or cradle
is unplugged from
AC power too soon.
Battery is faulty.
The FR68 Series
is not fully seated
in the cradle.
Ambient
temperature of the
cradle is too warm.
Extreme battery
temperature.
Maintenance & Troubleshooting
Action
Ensure the power cable is connected securely to both the
cradle and to AC power.
Remove and re-insert the FR68 Series into the cradle,
ensuring it is firmly seated.
Remove and re-insert the spare battery into the charging
slot, ensuring it is firmly seated.
Ensure cradle is receiving power. Ensure FR68 Series is
seated correctly. Confirm main battery is charging under
>
>
Settings
System
Power
. The 3600 mAh battery i s fully charged
in approximately six hours.
Verify that other batteries charge properly. If so, replace the
faulty battery.
Remove and re-insert the FR68 Series into the cradle,
ensuring it is firmly seated.
Move the cradle to an area where the ambient
temperature is between 0°C (32°F) and 35°C (95°F).
Battery does not charge if ambient temperature is below 0°C
(32°F) or above 45°C (113°F).
126
>
Start

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fr6876Fr6874

Table of Contents