GE Profile WPDH8800J Technical Service Manual page 53

Test Mode
t15 Dispenser Test
t16 Bulk Pumps Test
t17 Bulk Sensors Test
t18 AutoSpin Profi le
t19 Bulk Manual Priming
t20 Bulk Primed Status
Description
Verifi es the dispenser motor works and can locate
all 4 dispenser positions.
Verifi es all the Smart Dispenser Pumps work.
Verifi es all the Smart Dispenser Sensors work.
Tests each spin speed of the washer. Note: No
out-of-balance detection will be performed here,
so the washer will spin up regardless of any out-of-
balance condition in the drum.
Manually initiates the priming of the Smart
Dispenser pumps.
Checks the control status of the prime status of the
pumps and allows the user to change/reset the
prime status.
– 53 –