GE Profile WPDH8800J Technical Service Manual page 15

Always follow fabric manufacturer's care label when laundering.
Lock tab is visible only after
drawer has been pulled out
Dispenser Drawer Area: Detergent and fabric softener may build up
in the dispenser drawer. Residue should be removed once or twice a month.
■ Remove the drawer by first pulling it out until it stops. Then reach back into
the right rear corner of the drawer cavity and press down firmly on the lock tab,
pulling out the drawer.
■ Remove the insert from the bleach and fabric softener compartments
and the detergent insert. Rinse the inserts and the drawer with hot water
to remove traces of accumulated laundry products.
■ To clean the drawer opening, use a small brush to clean the recess.
Remove all residue from the upper and lower parts of the recess.
■ Return inserts to the proper compartments. Replace the dispenser drawer.
■ To reduce buildup in the Dispenser Drawer area:
Use only HE
High-Efficiency
detergent.
– 15 –
ge.com