A) On/Off Conditions: Overview - A.O. Smith 710 ASME Service Manual

12-7. (A) ON/OFF conditions: Overview

The following table shows the ON/OFF conditions of the water heater.
ON / OFF Conditions
Conditions needed to turn ON.
Conditions needed to turn OFF.
710 / 710 ASME Service Manual
For Every pump modes
The BTU requirement is more than 14,880 BTU/h
The water flow rate is more than 0.5 GPM
The BTU requirement is less than 11,900 BTU/h
Inlet temperature is higher than the set
temperature
Output temperature is over 194°F
The water flow rate is less than 0.4 GPM
56
CONFIDENTIAL
AND
OR
OR
OR
Ver. 1.00