Advertisement
LOW-NOx POWERED-BURNER MODELS
Conservationist
(BTP and BTPV) commercial water heaters offer precise
®
powered-burner performance for medium-demand commercial applications,
plus the flexibility of conventional atmospheric venting, sidewall venting or
direct venting. To help ensure optimum performance, A. O. Smith offers
professional start-up service on BTP and BTPV models.
VENTING OPTIONS
• BTP models designed for conventional atmospheric vertical venting.
Barometric draft regulating damper provided. Order Vent Kit Part # 170777-005.
• BTPV models designed for horizontal atmospheric sidewall venting or direct venting,
using optional vent kits.
• For sidewall venting order Vent Kit Part # 192049-000.
• For direct venting order Vent Kit Part # 192050-002.
LOW-NOx POWERED GAS BURNER (NATURAL GAS ONLY)
• Pre-mix design with internal Flue Gas Recirculation (FGR)
• Safety features include internal blocked flue sensor, separate pilot
system, internal thermal cutoff and anti-flashback barrier
FULLY AUTOMATIC CONTROLS
• Including safety shut-off, high-temperature limit control
• Dual thermostat, adjustable from 120º F to 180º F
DRAFT EQUALIZING COMBUSTION CHAMBER
• Patented dome system ensures optimum flue loading and efficient heat
transfer by balancing pressure inside combustion chamber
ASME TANK CONSTRUCTION ON ALL MODELS
• Rated working pressure: 160 PSI
FACTORY-INSTALLED AGA/ASME TEMPERATURE & PRESSURE
RELIEF VALVE
GLASS-LINED TANK WITH MULTIPLE ANODE RODS
• For optimum protection against tank corrosion
FLAME INSPECTION PORT
HANDHOLE CLEANOUT
• For easy cleanout of sediment from tank bottom
HIGH-ALTITUDE INSTALLATION
• Adjustable air intake damper easily reset for high-altitude installation by
authorized start-up agent
CODES AND STANDARDS
• Meets ASHRAE/IESNA 90.1-1999 thermal efficiency and standby loss requirements
• Meets SCAQMD R1146.2 low-NOx requirements
WARRANTY
• Three-year limited tank warranty
• For complete warranty information, consult written warranty shipped with
water heater, or contact A. O. Smith Water Heaters
Commercial Gas Water Heaters
®
ACGSS00305
Sept 2006R
Advertisement
Table of Contents
Related Manuals for A.O. Smith Conservationist ACGSS00305
Summary of Contents for A.O. Smith Conservationist ACGSS00305
- Page 1 • Meets ASHRAE/IESNA 90.1-1999 thermal efficiency and standby loss requirements • Meets SCAQMD R1146.2 low-NOx requirements WARRANTY • Three-year limited tank warranty • For complete warranty information, consult written warranty shipped with water heater, or contact A. O. Smith Water Heaters Commercial Gas Water Heaters ® ACGSS00305 Sept 2006R...
- Page 2 Burner(s) must be factory-installed, tested and started by an A. O. Smith Authorized BTP Start-up Agent before being placed into operation. www.hotwater.com 500 Tennessee Waltz Pkwy, Ashland City, TN 37015 ©2006 A.O. Smith Corporation Commercial Gas Water Heaters ® RECOVERY-GALLONS FIRST PER HOUR AT °F...
Need help?
Do you have a question about the Conservationist ACGSS00305 and is the answer not in the manual?
Questions and answers