F
22
IGURE
S
22:
TEP
• Assemble one 3-1/2" PULLEY (35) to the FOOT PLATE (L) using one 3/8 X 3" BLACK BOLT (8),
two STEP SPACERS 11/16" (27) and one 3/8" BLACK LOCK NUT (40). See FIGURE 22.
• Route the small ball end of the LOW CABLE (AN) around one 3-1/2" PULLEY (35) and assemble
the PULLEY to the LEG PEDESTAL (K) using one 3/8 X 3-3/4" BOLT (6), two 1-1/16" STEP
SPACERS (26) and one 3/8" SILVER LOCK NUT (19) as shown in FIGURE 22. (NOTE: The
LOW CABLE (AN) should be routed over the retaining bolt as shown in FIGURE 22.)
1/2
0
24
1/2
1
2
1/2
1/2
3
40
1/2
4
5
1/2
6