GE Profile PSF26PGWBB Technical Service Manual page 11

About CustomCool
How to Use
Empty the pan. Place the Chill/Thaw tray in the pan. Place
the items on the tray and close the pan completely.
Access by: Home > Options >Refrigerator Options >
CustomCool Pan
Use the following list to determine the best setting to use.
• On some models, ExpressChill™ has only one 45 minute setting.
• To stop a feature before it is fi nished; go into that feature's menu and press the OFF button.
• During ExpressThaw™ and ExpressChill, the display on the controls will count down the time in the cycle (on some
models).
• After the ExpressThaw cycle is complete, the pan will reset to the MEAT setting (32°F [0°C]) to help preserve thawed
items until they are used.
• The displayed actual temperature of the CustomCool pan may vary slightly from the SET temperature based on
usage and operating environment.
Note: For food safety reasons, it is recommended that foods be wrapped in plastic wrap when using ExpressThaw. This
will help contain meat juices and improve thawing performance.
How to Remove and Replace the Drawer
To remove: Pull the drawer out to the stop position.
Rotate all four swing locks to the unlock position. Lift the
front of the drawer up and out.
To replace: Make sure all four swing locks are in the
unlock position. Place the sides of the drawer into the
drawer supports, making sure the swing locks fi t on the
drawer slots. Lock all four swing locks by rotating them to
the lock position.
TM
(on some models)
How it Works
The CustomCool™ feature is used to quickly chill items, thaw items, or hold the pan
at a specifi c temperature. This feature is a system of dampers, a fan, a temperature
thermistor, and a heater. The pan is tightly sealed to prevent temperature fl uctuations
in the rest of the refrigerator. The controls for this pan are located on the dispenser with
the temperature controls.
– 11 –