Insert Tools, Accessories; Technical Data - Hilti TE 4-A18 Operating Instructions Manual

NOTE
Indication of the charge status is not possible while the power tool is in operation or immediately after operation. If the
battery charge status LEDs blink, please refer to the information given in section 9.

3 Insert tools, accessories

en
Designation
Hammer drill bits
Anchor-setting tools
Quick-release chuck for wood and metal drill bits
Keyed chuck
Wood drill bits
Wood drill bits (auger bits)
Metal drill bits (for steel)
Designation
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Battery
Battery
Battery

4 Technical data

Right of technical changes reserved.
Power tool
Rated voltage (DC voltage)
Weight of power tool
Dimensions (L x W x H)
Drilling speed without hammering
Hammer drilling speed
No-load speed in hammer drill mode
Single impact energy
Other information about the power tool
Chuck
NOTE
With the B18/1.6Ah battery, performance of the tool is reduced.
Battery
Rated voltage
4
B 18/3.3 Li‑Ion
21.6 V
Description
∅ 5...16 mm (³/₁₆" to ⁵/₈")
C-type connection end
With smooth shank, hexagonal shank
With smooth shank, hexagonal shank
∅ 3...20 mm (¹/₈" to ¾")
∅ Max. 14 mm (max. ⁹/₁₆")
∅ 3...10 mm (¹/₈" to ³/₈")
Short designation
C 4/36
C 4/36‑ACS
C 4/36-ACS TPS
C 4/36‑90
C 4/36‑350
B 18/3.3 Li‑Ion
B 18/2.6 Li‑ion
B 18/1.6 Li‑Ion
TE 4‑A18
21.6 V
3.3 kg (7.28 lb)
324 mm (12.76") x 94 mm (3.7") x 201 mm (7.91")
1,050/min
945/min
1,090/min
2.0 J
TE‑C Click
B 18/2.6 Li‑Ion
21.6 V
B 18/1.6 Li‑Ion
21.6 V