Hilti TE 4-A18 Original Operating Instructions
Hide thumbs
Also See for TE 4-A18:
- Operating instructions manual (17 pages) ,
- Operating instructions manual (14 pages)
Related Manuals for Hilti TE 4-A18
Summary of Contents for Hilti TE 4-A18
- Page 1 TE 4-A18 Operating instructions Mode d’emploi Manual de instrucciones Manual de instruções Printed: 28.05.2015 | Doc-Nr: PUB / 5200357 / 000 / 02...
- Page 2 This Product is Certified Ce produit est certifié Este producto esta certificado Este produto está certificado Printed: 28.05.2015 | Doc-Nr: PUB / 5200357 / 000 / 02...
-
Page 5: Table Of Contents
In these operating instructions, the designation “the power tool” always refers to the TE 4-A18 cordless rotary Always keep these operating instructions to- hammer. gether with the power tool. -
Page 6: Safety Instructions
Make a note of this data in your operating in- structions and always refer to it when making an enquiry to your Hilti representative or service department. Rated speed Drilling... - Page 7 away from moving parts. Loose clothes, jewellery 2.1.6 Service or long hair can be caught in moving parts. a) Have your power tool serviced by a qualified repair g) If devices are provided for the connection of dust person using only identical replacement parts. extraction and collection facilities, ensure these This will ensure that the safety of the power tool is are connected and properly used.
-
Page 8: Description
3.1 Use of the product as directed The TE 4-A18 is a hand-held, cordless rotary hammer with a safety slip clutch for hammer drilling in concrete and masonry, drilling in steel, wood and masonry and for driving and removing screws. -
Page 9: Technical Data
LEDs light constantly LEDs blink Charge status C LED 1, 2, 3, 4 C ≧ 75 % LED 1, 2, 3 50 % ≦ C < 75 % LED 1, 2 25 % ≦ C < 50 % LED 1 10 % ≦... -
Page 10: Care And Maintenance
Clean the sealing lip by wiping it Keep the power tool, especially its grip surfaces, carefully and then grease it again lightly with Hilti grease. clean and free from oil and grease. Do not use clean- It is essential that the dust shield is replaced if the sealing ing agents which contain silicone. -
Page 11: Troubleshooting
Hilti Service if the problem persists. The power tool or the battery Electrical fault. Switch the power tool off immedi- gets very hot. ately, remove the battery from the tool and allow it to cool down while keeping an eye on it, contact Hilti Service. -
Page 12: Disposal
Batteries that have reached the end of their life must be disposed of in accordance with national regulations or returned to Hilti. Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old power tools or appliances for recycling. - Page 13 Hilti Corporation LI-9494 Schaan Tel.: +423 / 234 21 11 Fax:+423 / 234 29 65 www.hilti.com Hilti = registered trademark of Hilti Corp., Schaan Pos. 3 | 20150515 Printed: 28.05.2015 | Doc-Nr: PUB / 5200357 / 000 / 02...