Initial Camera Setup - Ikelite 6165.01 Instruction Manual

Preparation
Clean the housing main o-ring and retest to make sure that it is
watertight. Refer to the Troubleshooting section, page 18.
Please read your camera manual thoroughly to have a full
understanding of each camera function. If you are new to underwater
photography, be sure to read the Photo Tips section, page 17.

Initial Camera Setup

- Insert a fully charged camera battery.
- Set Mode Dial to "A" Aperture-Priority." Shutter speed is locked at a
minimum 1/60th second with flash activated. Use "M" Manual mode for
faster shutter speeds. Other modes are not recommended underwater.
- Set Flash to "Forced Flash On
- In Rec MENU:
Set Aspect Ratio to 4:3 (normal TV) or 16:9 (high-definition TV).
Set Picture Size to "12m" and Quality to "Fine."
Set ISO Sensitivity to 200 and White Balance to "AWB." For best results
set to "Manual White Balance"
Set AF Mode to "1-Area" and Quick AF to "ON."
Set Face Recog. to "OFF", AF/AE Lock to "AF/AE."
Set Metering Mode to "Center-Weighted"
Set i.Exposure to "OFF", i.Resolution and Digital Zoom to "OFF."
Set Color Mode to "Standard" and AF Assist Lamp to "Off."
Set Red-eye Removal to "OFF" and Stabilizer to "ON."
Set Date Stamp to "OFF" unless otherwise desired.
In Clock Set, set the Date and Time.
In Setup MENU:
-
In ECO Economy, set Auto Power Off to "OFF" and Monitor Power Save
to "OFF."
Set Auto Review to "HOLD."
Insert and "Format" a SD card.
4
- continued
(before placing camera in housing)
"; flash fires in any conditions.
; reset for each working depth.
.