Initial Camera Setup - Ikelite 6183.33 Instruction Manual

Initial Camera Setup

- Insert a fully charged battery.
- Insert and format a SD or SDHC memory card.
- Set Mode Dial to "M" Manual. Set Shutter speed to 1/60th second or
1/125th second for fast moving subjects. Set Aperture to F8.0. These
settings are a good starting point for most underwater shooting
situations.
- RAISE camera flash. Set Flash Mode to "Flash Always Fires"
-
Set Macro mode to "ON"
- In the "M" Shooting MENU:
Set ISO sensitivity to "200" and AF area mode to "Center."
Set Autofocus mode to AF-S "Single AF."
Set Noise Reduction filter to "Normal" and Built-in ND filter to "OFF."
Set Active D-Lighting to "OFF" and Startup zoom position to "24."
Set Image quality to "Fine" and Image Size to "12m."
Set White Balance to "Auto1 (normal)."
Set Metering to "Center-weighted."
Set Continuous to "Single."
- In the Set Up Menu:
Set Time Zone and Date.
In Monitor Settings, set Image review to "ON."
Set Vibration reduction to "Normal."
Set Motion detection, AF assist, and Digital Zoom to "OFF."
Set Auto off to "5 min" and Blink Warning to "OFF."
4
(before placing camera in housing)
to shoot close-up pictures.
.