Initial Camera Setup - Ikelite 6182.77 Instruction Manual

Initial Camera Setup

1. Insert a fully charged battery and formatted memory card.
2. Set Time zone and date.
3. Set Shooting Mode to "A" Aperture priority or "M" Manual. In "A"
Aperture Priority mode the shutter speed will lock at 1/30th second. If a
faster shutter speed is desired or picture blur occurs, use "M" Manual
mode. For Macro
close-up" setting in the camera menu.
4. Set Metering to "Center-weighted."
5. Set Continuous Mode to "S" Single.
6. Set AF area mode to "Center (normal)."
7. Set Autofocus mode to (AF-S) "Single AF."
8. Set Flash exp. comp. to "0.0."
9. Set Noise reduction filter to NR "Normal."
10. Set Built-in ND filter to "OFF."
11. Set Active D-Lighting to "OFF."
12. In the camera Set up menu, set Flash control to "AUTO."
13. Set Flash Mode to
14. Set WB White Balance to "Auto (normal): AUTO1."
15. Set ISO to "80."
16. Set Image Quality to "FINE."
17. Set Image Size to "12m."
18. Set +/- Dial to "0."
- Flash is disabled in Continuous Shooting and Auto Bracketing modes.
(before placing camera in housing)
photography, set Aperture to f8 and engage "Macro
(lightning bolt in LCD).
5