Anton/Bauer TWIN Owner's Manual
Simultaneous two position charger
Hide thumbs
Also See for TWIN:
- Owner's manual (9 pages) ,
- Owner's manual (8 pages) ,
- Instruction sheet (2 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Anton/Bauer TWIN
Summary of Contents for Anton/Bauer TWIN
- Page 1 ® TWIN SIMULTANEOUS TWO POSITION CHARGER OWNER’S MANUAL...
-
Page 2: Standard Features
Like all Anton/Bauer chargers, everything is automatic. Once a battery is placed on the TWIN, the charger will evaluate the battery and then execute the proper charge routine. STANDARD FEATURES • Simultaneous Charging for all Anton/Bauer Logic Series batteries. -
Page 3: Operation
OPERATION Self-Test Upon applying mains power, each TWIN will initiate a self-test mode. This mode is indicated by the LED’s on the unit. Each position will light the red LED followed by the green LED. Upon completion of the self-test, the green status light will light steadily, indicating that the unit is ready for operation. -
Page 4: Three Stage Charging Methodology
Three Stage Charging Methodology In general, the TWIN will deliver a three stage charge routine to each battery. 1. Stage One will deliver a charge matched to the capabilities of the battery. During this stage, six separate cutoff methods are in operation, simultaneously, ensuring... -
Page 5: Removal Of Ac Mains Power
LED Indications Each charge position of a TWIN has a pair of LEDs (one red, one green) that indicate the status of the battery attached to that position. The following table identifies all of the TWIN indications and their meaning:... -
Page 6: Charge Times
Anton/Bauer batteries. Use of any other battery may be contrary to US Patent Law and the International Safety Standard Approvals, which this unit carries. The mains input of the TWIN is fused using a printed circuit board mounted device that should be replaced ONLY by a qualified service technician. -
Page 7: Limited Warranty
Anton/Bauer, Inc. (“Anton/Bauer”), 14 Progress Drive, Shelton, Connecticut 06484. If you (the purchaser of the Product from Anton/Bauer, or the person for whom the Product was purchased, if it was a gift) have any questions regarding Product applications, Product specification, or to obtain warranty service on this or any Anton/Bauer product, contact the company at the address above. - Page 8 The following are trademarks of Anton/Bauer, Inc.: The following are trademarks of Anton/Bauer, Inc.: ACS, ADM, All Chem, Anton/Bauer, Anton/Bauer logo and parallelogram design, Automatique, ACS, ADM, All Chem, Anton/Bauer, Anton/Bauer logo and parallelogram design, Automatique, DataTap, Dionic, Gold Mount, HyTRON, Impac, InterActive and design, LifeSaver, Logic Series, Logic...
Need help?
Do you have a question about the TWIN and is the answer not in the manual?
Questions and answers