Yamaha FZ6RC Service Manual page 95

1. Fast idle plunger coolant hose
2. Fast idle plunger
3. Synchronizing hose #1
4. Synchronizing hose #2
5. Fast idle plunger hose (fast idle plunger-throttle
body #1)
6. Intake air pressure sensor
7. Throttle position sensor
8. Fast idle plunger hose (fast idle plunger-throttle
body #4)
9. Negative pressure hose (throttle body-intake air
pressure sensor)
10. Synchronizing hose #4
11. Synchronizing hose #3
A. Secure the intake air pressure sensor lead, throttle
position sensor lead, and synchronizing hoses #3
and #4 using clamp. The top end of the clamp must
be positioned close to throttle body #3.
B. Pass the synchronizing hoses #3 and #4 between
the intake air pressure sensor lead and the throttle
position sensor lead.
C. Red paint mark
D. Secure the fast idle plunger hose (fast idle
plunger-throttle body #1) and synchronizing hoses
#1 and #2 using clamp. The top end of the clamp
must be positioned close to throttle body #2.
2-68
CABLE ROUTING