Yamaha FZ6RC Service Manual page 337

The tail/brake light fails to come on.
1. Check the tail/brake light bulb and
socket.
Refer to
"CHECKING THE BULBS
AND BULB SOCKETS" on page 8-78
OK↓
2. Check the front brake light switch.
Refer to
"CHECKING THE
SWITCHES" on page 8-75
OK↓
3. Check the rear brake light switch.
Refer to
"CHECKING THE
SWITCHES" on page 8-75
OK↓
4. Check the entire signaling system
wiring.
Refer to
"CIRCUIT DIAGRAM" on page
.
8-19
OK↓
This circuit is OK.
The turn signal light, turn signal indicator light or both fail to blink.
1. Check the turn signal indicator light
bulb and socket.
OK↓
2. Check the turn signal switch.
Refer to
"CHECKING THE
SWITCHES" on page 8-75
OK↓
3. Check the turn signal relay.
Refer to
"CHECKING THE RELAYS"
.
on page 8-83
OK↓
4. Check the entire signaling system
wiring.
Refer to
"CIRCUIT DIAGRAM" on page
.
8-19
OK↓
This circuit is OK.
→
NG
.
→
NG
.
→
NG
.
s
'
→
NG
→
NG
→
NG
.
→
NG
s
'
→
NG
8-22
SIGNALING SYSTEM
Replace the tail/brake light bulb, socket or
both.
Replace the front brake light switch.
Replace the rear brake light switch.
Properly connect or repair the signaling
system's wiring.
Replace the turn signal indicator light bulb,
socket or both.
Replace the left handlebar switch.
The turn signal relay is faulty and must be
replaced.
Properly connect or repair the signaling
system's wiring.