sion.
j. Measure the valve seat width "c" again. If the
valve seat width is out of specification, reface
and lap the valve seat.
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
EAS24310
CHECKING THE VALVE SPRINGS
The following procedure applies to all of the
valve springs.
1. Measure:
Valve spring free length "a"
G
Out of specification → Replace the valve
spring.
Free length (intake)
39.08 mm (1.54 in)
Limit
37.13 mm (1.46 in)
Free length (exhaust)
39.08 mm (1.54 in)
Limit
37.13 mm (1.46 in)
2. Measure:
Compressed valve spring force "a"
G
Out of specification → Replace the valve
spring.
VALVES AND VALVE SPRINGS
b. Installed length
Installed
force (intake)
132.40–152.40 N (13.50–15.54
kgf, 29.76–34.26 lbf)
Installed
force (exhaust)
132.40–152.40 N (13.50–15.54
kgf, 29.76–34.26 lbf)
Installed length (intake)
33.40 mm (1.31 in)
Installed length (exhaust)
33.40 mm (1.31 in)
3. Measure:
Valve spring tilt "a"
G
Out of specification → Replace the valve
spring.
Spring tilt (intake)
2.5 ° ° ° ° /1.7 mm (0.07 in)
Spring tilt (exhaust)
2.5 ° ° ° ° /1.7 mm (0.07 in)
5-25
compression
spring
compression
spring