1. Fuel tank cap
2. Fuel tank
3. Fuel pump
4. Fuel hose
5. Fuel tank breather hose (right side)
6. Fuel tank drain hose (left side)
7. Throttle body
8. Fuel hose connector
9. Fuel pump bracket
10. Rubber cover
11. Fuel tank breather pipe (right side)
12. Rollover valve (California only)
13. Fuel tank breather hose (rollover valve to canister)
(California only)
A. Release to atmospheric pressure
B. Make sure that the connector is connected securely.
C. The protrusion of the fuel pump must be aligned
with the fuel tank mark.
D. Direct the clip end toward front of the vehicle.
E. For California only
F. Direct the clip end to ward top side of the vehicle.
G. To canister
H. Position the fuel tank breather hose, so that the
white paint mark facing upward.
2-62
CABLE ROUTING