Technical Specifications - Heatrae Sadia SUPREME 220SS Fitting Instructions And User Manual

Please read and understand these instructions prior to installing
your Supreme water heater. They are for use by competent
personnel i.e. trained, experienced and qualified. Instructions
only detail key operations. They do not supersede national,
mandatory or legal requirements which may apply to the product,
installation, environment or personnel associated with servicing
the Supreme. WARNING: electronics control by switching 'N'
(neutral), in some instances neutral terminations will be at 230
volts with respect to earth.
Particular attention should be paid to the section headed
IMPORTANT INSTALLATION POINTS. Following installation and
commissioning, the operation of the heater should be explained
to the customer and these instructions left with them for future
reference.

TECHNICAL SPECIFICATIONS

Electrical rating
Nominal capacities
Electrical rating
Nominal capacity
Weight (full)
Rated pressure
Minimum supply pressure
Maximum supply pressure
Enclosure rated
A-weighted sound pressure level is below
Nominal commissioning times (minutes) to temperature ready
Supreme 220SS
Supreme 250SS
Supreme 310SS
Supreme 560SS
2
2.8 - 3.0 kW 230 - 240V
Model 220SS
Model 250SS
Model 310SS
5.5 - 6.0 kW 230 - 240V
Model 560SS
Model 220SS
Model 250SS
Model 310SS
Model 560SS
50
60
80
60
10.0 litres
15.0 litres
25.0 litres
40.0 litres
36 kg
42 kg
55 kg
75 kg
0MPa (0 bar)
0.05MPa (0.5 bar)
1.0MPa (10 bar)
IP X2
70 dB