Smart Cartridge - Tor-Rey LSQ Series User Manual

With this option you can program the scale operating mode (label or paper) only placing the selector button of
the smart cartridge in the right place (see figure), in this way you don't need to enter programming mode to change the
operating mode. This way you don't program the printing format, it loads the last printing format for each operating
mode.
By default this option is activated. In case you desire disable it, by pressing the keys X, 1, 2 during the
countdown.To active it again just press the same keys sequence during the countdown..
To program any of the operating modes follow the transfer that is in the rear side of the cartridge. It shows the
position that should be the selector button.
Suppose that you configure your scale with the following operation formats.(by PC or from your scale).If you are working
in BRIEF PAPER mode with and by the smart cartridge change to LABEL W/GAP by product mode the printing mode
change automatically to customized label w/gap. If it is change to BRIEF CONTINUOUS LABEL the smart cartridge
configure the printing format automatically and so to any operation mode. Note that although change from paper to label
or vice versa the formats that are in the scale won`t be lost.
It is possible, at any moment to enter the programming mode and change the printing format, this way, the format
that is working in the scale for the current operating mode is updated. If the smart cartridge is enabled, and the mode is
changed by programming to one different from the cartridge, then it will automatically be changed to that as the
cartridge. Only the printing format will be changed.

SMART CARTRIDGE

SELECTOR BUTTON
LABEL WITH GAP
LABEL WITHOUT GAP
CONTINUOUS LABEL
PAPER
4