Table of Contents
Advertisement
Your scale has 4 preprogrammed label printing formats which can be printed in 2 label sizes
LABEL SIZES FOR PREPROGRAMMED LABEL PRINTING FORMATS
PRINTING LABELS
To print a weighed product, there are two ways to print it, Automatic or Manual:
1.- Manual printing mode
To print in this mode just load a PLU, or introduce the price, place the product over the plate and press the
key. Depending how the scale is configurated, also could be necessary or not that load a PLU.
Once the scale have printed the label or when the weight pass through zero, the PLU or the introduced price
will be cleared.
2.- Automatic printing mode:
It does not matter if you load the PLU, or introduce the price of the product before or after place a product over
the scale's plate, always this operation of the scale have passed trough zero (if the scale passed trough NEG, without
passed zero weight, not print), then once the weigh over the plate will be stable will print a label.
NOTE:
To enable the automatic printing mode, just press the
function press the
key or Pre-pack again and only be Pre-pack without automatic printing.
Note: Your scale has as default the manual printing mode, to print a label mist be a total.
In the labeling formats, you can fix the price for weighed or unweighed products, for avoid load a PLU, or
introduce the price of the product constantly, once the scale is operating, load the PLU or type the product price then
press the
key, in this way the PLU or the price will not be erased every time you print a label, or the weigh pass
trough zero.
When you are working with this function will select the automatic printing mode.
NOTE: If is an unweighed product, even if your scale is working with the automatic printing mode , it will only print the label in manual
mode.
LABEL PRINTING FORMAT
38
1 4
at
key and this enable the function automatically, for disabling this
FIXED PRICE FUNCTION
18
Hide quick links:
Advertisement
Table of Contents
