Entering To Programming Mode; Feeding The Paper Or Label - Tor-Rey LSQ Series User Manual

TOTAL SALE
This can be printing in any mode (label or paper).
1.- For printing the total sale press
2.- In case you are working with label with or without gap will ask you that press the
amassed and you could continue with the total sale printing, in case of paper will print it in continuous form.
NOTES:
1.- The scale assign the PLU's numbers in automatic form assigning them to a key ( in programming direct mode)
from 1 to 72 and are assigned in horizontal form. The 1 is assigned in
72.
2.- The right column of the keyboard don't operate for assign PLU's.
3.- When the scale ask you overwrite will delete all the previous information to that PLU and will assign the new one.
4.- In sales mode if you type a product name and after you press
press or .key.
5.- Only you can create 72 PLU's in direct form.
6.-When you type a product name and this is printing (in a label) and don´t save the name the accumulate sale will
make on the accumulate of several products.
8.- In the add when you don´t save the product name this will not be printing.
9.- During a transaction only will print NON PLU.
ENTER TO PROGRAMMING MODE
If you want to enter to programming mode without the use of the programming key. Will be necessary that
enable this option on the configuration menu. See Programming manual page21. Activate the key switch and introduce
PWD? Press the
Also you can use the

FEEDING THE PAPER OR LABEL

PAPER
FEED
Press the
the printer will advance a label.
.
key when is disable the key on PROG. MENU.
, to enter programming mode, only if this is enable.
key, if you are working with paper, the printer will advance a line, if you are working with label
, the 2 in
it will ask if you want to save the plu. You must
14
key in order that labels
and so successively to PLU