Table of Contents
Advertisement
1.- Unpack the scale and check for any missing piece (see page 7 "Important parts" ), or any mistreated or striped
piece.
Your scale must include the following:
QUANTITY
1
Smart cartridge
1
Set of 2 keys for programming access
1
Box with 1 paper roll and 1 label roll
1
Serial cable for PC communications
1
User manual
1
Programming manual, software manual PC , Software PC (CD)
1
Easy programmed template
1
AC-AC Adaptor 110 VAC input, 24 VAC output, 3A
1
Cleaning pad (disposable)
2.-
In order to have the best results using your scale it must be placed where it is free of movements or vibrations
3.-
Set up the adjustable swing turret (5) see page 7, lifting and turning the arm to the top, or you can adjust it where
you can see the displays. If you want, you can adjust the viewing angle by loosening the holder(12) and turning
the display module to the desired position, then, tighten the holder again.
4.-
Make sure that its 4 leveling bases (10) are supporting the scale over the surface where the scale is going to be
placed, if not, adjust the leveling bases tightening or loosening them until the scale is leveled with the help of the
level (17) under the platter(2) watching that the bubble matches with the black circle.
5.-
Continue with the steps CHANGING THE PAPER ROLL OR CHANGING THE LABEL ROLL, as we suggest in
the next pages.
6.-
Connect your adaptor to VAC. outlet.
Figure No. 1 The way to connect the output adaptor (plug) to the scale and the outlet to the line feed
7.-
Turn on the scale activating the switch placed at the left side of the scale (9) (see page 7)
IMPORTANT: Make sure there are no false contacts, because they could to cause problems
INSTALLATION
CONNECTORS BADGE
PLUG
3
DESCRIPTION
Hide quick links:
Advertisement
Table of Contents
