Calculating A Discount; Change Calculation; Finishing A Sale - Tor-Rey LSQ Series User Manual

CALCULATING A DISCOUNT

You may use this key, for discounting a certain quantity in percentage or in cash of the total accumulated in a
sale. In order to make a discount press the
make in total press the
key for ending with the operation.
Note: Be sure this option is enable into the configuration programming. If the funciton is enable can request the introduction of the
supervisor password 4 digits (see page 20 and 21 of the programming manual)

CHANGE CALCULATION

You may use this key when the commercial transaction has finished and the customer pays with an equal or
greater bill than the amount he has to pay.
1).- First press the
you must enter the amount that the customer is paying.
Notice the quantity of items will be zero, due there will be showed the total that the customer must to pay.
2).- Type the amount the customer is paying.
3).- Then press the
4).- Immediately the scale will print the ticket with the sale, the paid cash and the change included.

FINISHING A SALE

To finishing a sale just press the
not necessary of the
Note: The maximum transactions numbers using paper are 32, using continuous label are 15, and for continuous
labels in check format are 10.
key again, then type the percentage or the cash to discount and the press again the
key, and on the indicator will appear the amount to pay, and will show CASH? Indicating that
key again and the displays will show the change:
key was used.
key if you desire to make a discount in percentage. If you desire to
key, at this moment the scale will print the sale ticket. This step it`s
17