Manuel Operation With Control Panel - UFO MICATRONIC T23EN User Manual

Hide thumbs Also See for MICATRONIC T23EN:
Table of Contents

Advertisement

If you use "Timer On/Off" function everyday for the same time, you can use "Everyday"
button to avoid repeating these settings. Press "Everyday" button after "Timer On/Off"
setting is completed. Heater will turn on and turn off automatically at the preset time as
described above. "Everyday" icon can be seen on the remote control screen when this
function is activated.
To cancel the function, press the "Everyday" button again.
NOTE! Press Cancel button to cancel all time settings. The settings will recede unless you
press (Clock, Timer On, Sleep ve Timer Off) necessary button to save your time settings
in 20 seconds.
Press Cancel button to cancel all kinds of time settings.
Repeated presses on the buttons will gear the speed of buttons and intervals with the
presses will slow down the process.
Press Cancel button with the intervals of 3 seconds to cancel all settings of your remote
Set your Sleep timer again in case of turning off and on the heater.
control.
Once you set your On/Off time, such functions will operate in daily set times.
The heater is to be in stand-by mode to operate On timer.
Clock and UFO logo keeps functioning in Stand by mode.

4.1.4. Manuel Operation with Control Panel

When the heater is plugged, H0 appears on the control
panel indicating that the heater is at stand by mode.
The 2nd digit of the power level indicates the increasing
power level by 1 to 5. The On/Off button which is located
over the On/Off symbol, simply turns on and turns off
(Stand by) the heater.
To adjust the power, simply press the button over the
"increasing lines" symbol. Each press will increase the
heating power between 1 to 5 cycle.
Press the ON/OFF button to switch to stand by mode
while heater is operating. When heater is turned on with
the same button, it will continue to operate at the same
level.
Unplug the power cord to disconnect the power of the heater.
If timer is set by the remote control,a warning red LED light appears continuously on the
screen.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Micatronic t19en

Table of Contents