Installing An Air Filter (Optional) - HP A-F5000 Installation Manual

Figure 22 Insert the CF card into the slot

Installing an air filter (optional)

NOTE:
You must install the air filter before you install the mounting brackets.
The air filter of the A-F5000 is installed at the air intake vents on the left of the chassis (when you face the
front panel of the chassis) to prevent dust from entering the chassis.
Follow these steps to install an air filter:
Install the upper and lower slide rails to the chassis: use a Phillips screwdriver to fasten the screws
1.
on the slide rails, as shown in
Figure 23 Install the air filter slide rails
Push the air filter along the slide rails into the chassis.
2.
Figure 23.
23