Rack-Mounting; Installation Tools; Accessories Supplied By The Firewall - HP A-F5000 Installation Manual

Make sure the grounding terminal of the AC power receptacle is well grounded.
•
• Install a lightning arrester at the input end of the power supply to enhance the lightning protection
capability of the power supply.

Rack-mounting

Before mounting the firewall in a rack, adhere to the following requirements:
• Install the firewall to a rack that has rack shelves.
The rack is sturdy enough to support the firewall and its accessories.
•
Make sure that the size of the rack is appropriate for the firewall, and that there is enough clearance
•
around the left and right sides of the firewall for heat dissipation.
For heat dissipation and device maintenance, make sure the front and rear of the rack is at least 0.8
•
m (2.62 ft) away from walls or other devices, and that the headroom in the equipment room is no
less than 3 m (9.84 ft).

Installation tools

Flat-blade
screwdriver
RJ45 crimping
pliers
NOTE:
No installation tool is provided with the firewall. Prepare them yourself.

Accessories supplied by the firewall

Console cable
M6 screw
Phillips screwdriver Needle-nose pliers
Network cable
Multimeter
tester
ESD-preventive
Grounding cable
wrist strap
Cage nut
Wire-stripping
pliers
Mark pen
Cable tie
11
Diagonal pliers
Mounting
brackets