Nsq1Gt8P40; Nsq1Xp20; Power Supplies - HP A-F5000 Installation Manual

Figure 4 NSQ1GT8C40 front panel
(1) Copper ports (GE0 through GE7)
(3) Captive screw

NSQ1GT8P40

The NSQ1GT8P40 provides eight fiber ports and four combo interfaces.
Figure 5 NSQ1GT8P40 front panel
(1) Fiber ports (GE0 through GE7)
(3) Captive screw
NOTE:
A combo interface comprises a copper port and an SFP port. By default, the copper port of a combo
interface is enabled. The two ports cannot work simultaneously. When you enable either port, the other
port is automatically disabled. To activate the copper combo port or fiber combo port, use the combo
enable { copper | fiber } command in interface view.

NSQ1XP20

The NSQ1XP20 provides two XFP ports and supports the LAN PHY mode only.
Figure 6 NSQ1XP20 front panel

Power supplies

The HP A-F5000 can be DC-powered or AC-powered. You can install two power supplies in your firewall,
and they must be the same model.
(2) Combo interfaces (GE8 through GE11)
(4) Ejector lever
1
(2) Combo interfaces (GE8 through GE11)
(4) Ejector lever
3
2
4 3