Installing The Firewall To The Rack; Grounding The Firewall - HP A-F5000 Installation Manual

Installing the firewall to the rack

Follow these steps to install the firewall to the rack:
Put the firewall on the rack shelf, slide the firewall, and align the screw holes on the mounting
1.
brackets with the cage nuts on the rack.
Fix the firewall horizontally by fastening the mounting brackets to the rack with appropriate pan
2.
head screws. The specifications of pan head screws must satisfy the installation requirements, and
rustproof treatment has been made to their surfaces.
Figure 17 Fix the firewall to the rack

Grounding the firewall

WARNING!
Correctly connecting the firewall grounding cable is crucial to lightning protection and EMI protection.
Follow these steps to connect the grounding cable:
Remove the grounding screw from the rear panel of the firewall chassis.
1.
Attach the grounding screw to the OT terminal of the grounding cable.
2.
Use a screwdriver to fasten the grounding screw into the grounding screw hole.
3.
Connect the other end of the grounding cable to the grounding strip of the rack.
4.
18