Conversion From Lp Gas To Natural Gas; Make Gas Connection 15 - KitchenAid Freestanding outdoor grilll Installation And Use Manual

Conversion from LP Gas to
Natural Gas
Installation of the regulator
1. Turn off the main gas supply valve.
2. Disconnect 20 lb LP gas fuel tank (if present). 2 Di t 20 lb LP
3. Turn off all burner control valves.
4. Remove the 20 lb LP gas fuel tank (if present) from the grill cart.
5. Use an adjustable wrench to remove the LP regulator from the
manifold.
6. Use an adjustable wrench to install the Natural gas
regulator hose to the manifold and secure. Attach the
Natural gas regulator to the side panel inside the grill cart
with the two screws that are pre-assembled on the regulator.
f l t k (if t)
Make Gas Connection
1. A combination of pipe fittings must be used to connect the grill
to the existing gas line.
 The 10 ft (3.0 m) PVC flexible gas supply hose design certified
by CSA must be used.
Pipe-joint compounds suitable for use with Natural gas

must be used. Do not use Teflon®+ tape.
 There must be a certified manual shut-off valve in the gas
supply line near the grill for easy access.
2. Connect the brass connector on one end of the 10 ft (3.0 m)
PVC flexible gas supply hose to the Natural gas pressure
regulator.
3. Connect the quick connector on the other end of the
10 ft (3.0 m) PVC flexible gas supply hose to the rigid Natural
gas supply pipe.
B
A. Manifold
B. Left side panel
C.10 ft. (3.0 m) PVC gas hose
D. Natural gas pressure regulator/hose assembly
† ®Teflon is a registered trademark of E.I. Du Pont De Nemours
and Company.
p
A
C
D
17