Gas Conversion; Tools And Parts For Gas Conversion; Conversion From Lp Gas To Natural Gas - KitchenAid 720-0787E Assembly Instructions And Use And Care Manual

Tools and Parts for Gas Conversion

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Parts supplied
 Natural gas orifices
Parts needed
 Natural gas conversion kit Part Number 710-0003. See
 "Assistance" section to order. The conversion kit includes:
 Natural gas regulator 4" W.C. (marked "Natural Gas
 Regulator")

10 ft (3.0 m) Natural gas hose with Quick Connector
assembly 5.9" (150 mm)

6 mm nut driver

6 mm wrench

Hex key

Flat washer
 Truss head screw with lock
IMPORTANT: Gas conversions must be done by a qualified
installer. Before proceeding with conversion, shut off the gas
supply to the grill.
GAS CONVERSIONS
6mm
Conversion from LP Gas to Natural
Gas
Installation of the regulator
1. Turn off the main gas supply valve.
2. Disconnect 20 lb LP gas fuel tank (if present).
3. Turn off all burner control valves.
4. Remove the 20 lb LP gas fuel tank (if present) from
the grill cart.
5. Use an adjustable wrench to remove the LP
regulator from the manifold.
6. Use an adjustable wrench to install the Natural gas
regulator hose to the manifold and secure. Attach the
Natural gas regulator to the side panel inside the grill
cart with the two screws that are preassembled on the
regulator.
23