Product Application; Connecting End Node Or Switch - Planet FSD-808P User Manual

3.3 Product Application

3.3.1 Connecting end node or Switch

1. Place the FSD-808P on a smooth surface or fasten the mounting brackets
purchased separately with the provided screws in a standard 12" rack.
2. Connect the power cord to the power inlet socket of FSD-808P and the other
end into the local power source outlet. When the Switch receives power, the
Power LED should remain solid Green.
3. Connect other switch or PC to one port of the FSD-808P using Category 3/4/5/5e
UTP/STP cabling.
4. Connect another switch or PC to the other port of FSD-808P by following the
same process as described in Step 3.
Power Line (AC)
AC
100Base-TX UTP
100Base-TX UTP with PoE
PoE
2.4GHz 802.11n
N
Cable distance for Switch
The cable distance between the FSD-808P and PC should not
exceed 100 meter for UTP/STP cable.
Make sure the wiring is correct
It can be used Category 3/4/5 cable in 10 Mbps operation.
reliably operate your network at 100Mbps, you must use an
Note
Unshielded Twisted-Pair (UTP) Category 5/5e cable, or better Data
Grade cabling. While a Category 3 or 4 cables may initially seem
to work, it will soon cause data loss.
FSD-808P
PoE PoE
802.3af PoE 802.3af PoE 802.3af PoE
IP Camera VoIP Phone VoIP Phone
Figure 3-4: End node or Switch Connection
Power
AC
PoE PoE
N
N
LAN / PCs
10/100Base-TX Data
802.3af PoE
Wireless AP
To
13