Error Message List - Brother P-Touch 1400 User Manual

Error Message List

Error Message
1 BLOCK LIMIT!
7 LINE LIMIT!
50 LINE LIMIT
REACHED!
BUFFER EMPTY!
BUFFER FULL!
CASSETTE
CHANGED!
CHECK
BATTERIES!
Cause
• This message appears if you
try to use the Numbering
function when multiple
blocks of text have been
entered with the PANEL
Label Type mode selected.
• This message appears if 7
lines have already been
entered in a text block when
n
you press .
• This message appears if you
delete , causing the
number of lines in a block to
exceed the 7-line limit.
• This message appears if 50
text blocks have already
been entered when you press
g n
, then .
• This message appears if no
text has been typed in when
you try to print or Preview
function.
• This message appears if you try
to add a character, a space, a
new line, a new block, a
symbol, an accented character
or a bar code after the
maximum number of characters
has already been entered.
• This message appears if the
tape cassette was changed
while the P-touch paused for
the tape to be cut.
• This message appears if a
combination of new and
used batteries, a combination
of batteries of different types
(alkaline, Ni-Cd and Ni-
MH), manufacturers or
models, or a combination of
recharged and uncharged
batteries have been installed.
Solution
• Cancel the Numbering
function.
• Limit the number of text
blocks to 1.
• Limit the number of lines in
a text block to 7.
• Adjust the number of lines
so that the block will not
have more than 7 lines.
• Limit the number of text
blocks to 50.
• Type in some text before
trying to perform any of
these operations.
• Delete some existing text
before trying to add any
more.
• Change the tape cassette
back again.
• Replace the batteries with
six new AA batteries of the
same type.
• If rechargeable batteries are
installed, recharge all
batteries.
59