Chapter Iv Troubleshooting And Error Message; Precautions; After Repairing - Brother P-touch QL-700 Service Manual

CHAPTER IV TROUBLESHOOTING AND
This section gives the service personnel some of the troubleshooting procedures to
be followed if an error or malfunction occurs with this machine.
It is difficult to anticipate all of the possible troubles which may occur in future and
determine the troubleshooting procedures, so this chapter covers some sample
troubles.
However, those samples will help service personnel to identify other defective
elements and repair them if he/she analyzes and examines this chapter carefully.

4.1 PRECAUTIONS

Be sure to observe the following precautions to prevent the secondary problems from
happening during troubleshooting.
(1) Make sure to unplug an AC cord to ensure no power supply, when doing
conductivity test with a tester.
(2) When printing error occurs, pull out the thermal head cable from the connecter
until the peripheral circuit related to the thermal head works properly.

4.2 AFTER REPAIRING

Verify again that the repaired portion works properly. Then adjust and examine this
machine according to
It is recommended to record and store actual troubleshooting and repair procedures
to accumulate repair know-how.
ERROR MESSAGE
"APPENDIX 1 SERVICEMAN SOFTWARE TOOL (Version
IV - 1
1.00)".