Brother P-Touch 1400 User Manual page 67

Error Message
INPUT ABCD AT
BEGIN & END!
INSERT 24mm TAPE
INSERT 18mm TAPE
INSERT 12mm TAPE
INSERT 9mm TAPE
INSERT 6mm TAPE
LENGTH LIMIT!
MEMORY FULL!
Cause
• This message appears if a
letter between A and D has not
been entered at the beginning
and end of the bar code data
when the CODABAR
protocol is selected.
• This message appears if a
24-mm-wide tape cassette is
not installed when printing
an Auto Format template
created for 24-mm-wide
tape.
• This message appears if a
18-mm-wide tape cassette is
not installed when printing
an Auto Format template
created for 18-mm-wide
tape.
• This message appears if a
12-mm-wide tape cassette is
not installed when printing
an Auto Format template
created for 12-mm-wide
tape.
• This message appears if a
9-mm-wide tape cassette is
not installed when printing
an Auto Format template
created for 9-mm-wide tape.
• This message appears if a
6-mm-wide tape cassette is
not installed when printing
an Auto Format template
created for 6-mm-wide tape.
• This message appears if you
try to print or use the
Preview function when the
length of the text is greater
than the 1 m limit.
• This message appears if you
try to store a text file after
approximately 2000
characters have already been
stored in the memory.
Solution
• Enter a letter between A and
D at the beginning and end
of the bar code data.
• Install a 24-mm-wide tape
cassette.
• Install a 18-mm-wide tape
cassette.
• Install a 12-mm-wide tape
cassette.
• Install a 9-mm-wide tape
cassette.
• Install a 6-mm-wide tape
cassette.
• Delete some of the text.
• Delete an unwanted file to
make space for the new one.
61