Nibe F1245 User Manual page 68

Caution
It cannot be set "stop additional heat" higher than "stop heating".
Caution
In systems where heating and cooling share the same pipes "stop heating"
cannot be set higher than "start cooling".
degree minute setting
Menu
4.9.3
current value
Setting range: -3000 – 3000
start compressor
Setting range: -1000 – -30
Default value: -60
start addition
Setting range: -2000 – -30
Default value: -400
diff. between additional steps
Setting range: 0 – 1000
Default value: 100
66 Chapter 3 | F1245 – at your service NIBE™ F1245