Nibe F1245 User Manual page 62

Operating mode auto
In this operating mode you cannot select which functions are to be permitted
because it is handled automatically by the heat pump.
Operating mode manual
In this operating mode you can select what functions are permitted. You
cannot deselect "compressor" in manual mode.
Operating mode add. heat only
Caution
If you choose mode "add. heat only" the compressor is deselected and there
is a higher operating cost.
In this operating mode the compressor is not active and only additional
heating is used.
Functions
"compressor" is that which produces heating and hot water for the accom-
modation. If "compressor" is deselected, a symbol in the main menu on the
heat pump symbol is displayed. You cannot deselect "compressor" in
manual mode.
"addition" is what helps the compressor to heat the accommodation and/or
the hot water when it cannot manage the whole requirement alone.
"heating" means that you get heat in the accommodation. You can deselect
the function when you do not wish to have heating running.
"cooling" means that you get cooling in the accommodation in hot weather.
You can deselect the function when you do not wish to have the cooling
running. This alternative requires an accessory for cooling or if the heat pump
has a built in function for cooling.
Caution
If you deselect "addition" it may mean that sufficient heating in the accom-
modation is not achieved.
60 Chapter 3 | F1245 – at your service NIBE™ F1245