Nibe F1245 User Manual page 31

Schedule: The schedule to be changed is selected here.
Activated: Scheduling for the selected period is activated here. Set times are
not affected at deactivation.
System: Which climate system the schedule is for is selected here. This altern-
ative is only displayed if more than one climate system is present.
Day: Select which day or days of the week the schedule is to apply to here.
To remove the scheduling for a particular day, the time for that day must be
reset by setting the start time to the same as the stop time. If the line "all"
is used, all days in the period are set for these times.
Time period: The start and stop time for the selected day for scheduling are
selected here.
Adjusting: How much the heating curve is to be offset in relation to menu
1.1 during scheduling is set here. If the rooms sensor is installed the desired
room temperature is set in °C.
TIP
If you wish to set similar scheduling for every day of the week start by filling
in "all" and then changing the desired days.
Chapter 3 | F1245 – at your service NIBE™ F1245 29