Makita 3601B Instruction Manual page 8

Trimmer guide (Optional accessory)
Trimming, curved cuts in veneers for fur-
niture and the like can be done easily with
the trimmer guide. The guide roller rides
the curve and assures afine cut.
Install the trimmer guide on the tool base
with the wing bolts
(B).
Loosen the wing
bolt (A) and adjust the distance between
the bit and the trimmer guide by turning
the fine adjusting screw (1.5 mm or about
1/16" per turn). At the desired distance,
tighten the wing bolt (A)
to
secure the
trimmer guide in place. When adjusting the
guide roller up or down, loosen the wing
bolt ( C ) . After adjusting it, tighten the
wing bolt ( C ) securely.
When cutting, move the tool with the guide
roller riding the side of the workpiece.
Wing bolt
Fine
adjusting screw
__
d e r
-
Wing bolt
( A I
Wing bolt (CI
roller
n