Download  Print this page

Advertisement

INSTRUCTION MANUAL
Router
3601B
005038
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
1

Advertisement

   Related Manuals for Makita 3601B

   Summary of Contents for Makita 3601B

  • Page 1

    INSTRUCTION MANUAL Router 3601B 005038 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    ENGLISH SPECIFICATIONS Model 3601B Collet chuck capacity 12 mm or 1/2" No load speed (min 23,000 Overall height 190 mm Net weight 3.6 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

  • Page 3: Router Safety Warnings

    the risk of electric shock. 21. Store idle power tools out of the reach of 10. Use of power supply via a RCD with a rated children and do not allow persons unfamiliar residual current of 30mA or less is always with the power tool or these instructions to recommended.

  • Page 4: Functional Description

    10. Before using the tool on an actual workpiece, let it run for a while. Watch for vibration or Place the tool on a flat surface. Turn the scale ring until it wobbling that could indicate improperly makes contact with the base. Loosen the knob. Turn the installed bit.

  • Page 5

    OPERATION For tool with lock-off button Set the tool base on the workpiece to be cut without the To prevent the switch trigger from being accidentally bit making any contact. Then turn the tool on and wait pulled, a lock-off button is provided. until the bit attains full speed.

  • Page 6

    Straight guide 1. Base plate 2. Templet guide 005046 005043 Secure the templet to the workpiece. Place the tool on the templet and move the tool with the templet guide The straight guide is effectively used for straight cuts sliding along the side of the templet. when chamfering or grooving.

  • Page 7: Replacing Carbon Brushes

    tighten the wing bolt (C) securely. 1. Hose 2. Joint 1. Wing bolt (B) 3. Vacuum hose 2. Fine adjusting 4. Outer diameter screw φ32 mm 3. Wing bolt (A) 5. Inner diameter 4. Trimmer guide φ38 mm 5. Wing bolt (C) 6.

  • Page 8: Router Bits

    Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Straight & groove forming bits • Edge forming bits • Laminate trimming bits •...

  • Page 9

    "V"Grooving bit Board-jointing bit 005118 005123 1/4" 006454 006459 Drill point flush trimming bit Corner rounding bit 005120 005125 006460 006456 Chamfering bit Drill point double flush trimming bit 005126 005121 006457 006462...

  • Page 10

    Cove beading bit Ball bearing chamfering bit 005132 005129 1/4" 006464 006467 Ball bearing flush trimming bit Ball bearing beading bit 005130 005133 1/4" 006465 006468 Ball bearing corner rounding bit Ball bearing cove beading bit 005131 005134 1/4" 006466 006469...

  • Page 11

    Ball bearing roman ogee bit 005135 006470...

  • Page 12

    Makita Corporation 883011I8...

Comments to this Manuals

Symbols: 0
Latest comments: