Basic Installation - TRENDnet TEW-815DAP User Manual

Dual band wireless access point

Hide thumbs Also See for TEW-815DAP:

Table of Contents

TRENDnet User's Guide

Basic Installation

1. Connect the power adapter to the access point and then to a power outlet. Connect

your computer to one of the access point's LAN port. Push the ON/OFF (EU version)

switch on the TEW-815DAP to power up the access point.

2. Assign a static IP address to your computer's network adapter in the subnet of

192.168.10.x (ex. 192.168.10.25) and a subnet mask of 255.255.255.0. (Please refer to

the

Appendix

on page 49 on how to assign static IP address to your computer)

3. Open your web browser and enter http://tew-815DAP.

Note: You can also access the device using the default IP address (192.168.10.100)

4. Enter the User Name and Password. By default

User Name: admin

Password: admin

5. The Wizard will start. Click Next to begin.

Note: The Wizard should automatically appear. If the wizard does not appear

automatically, then click Wizard.

6. Enter a new password, verify the new password and click Next.

7. Select Access Point Mode and then click Next.

TEW-815DAP

Table of Contents