The Factory Default Settings - Axis 2420 User Manual

Network camera

Hide thumbs Also See for AXIS 2420:

Table of Contents

AXIS 2420 User's Manual

The Factory Default Settings

In certain circumstances, it may be necessary to reinstate the Factory Default settings for

your AXIS 2420. This is performed by clicking the appropriate button in the

Administration Tools, or by pressing the Control Button (see page 10). Follow the

instructions below to reinstate the product factory default settings using the Control

Button:

1. Switch off the AXIS 2420 by disconnecting the power cable.

2. Press and hold the Control Button pressed, and reconnect the power supply cable.

3. Continue to keep the Control Button pressed until the Status Indicator displays yellow

(note that this may take up to 15 seconds), then release the Control Button. When the

Status Indicator displays green (which can take up to 1 minute) the AXIS 2420 will

then have been reset to the original factory default settings.

Note:

Reinstating the factory default settings causes all parameters (including the IP address) to be

reset.

The Factory Default Settings

Table of Contents

Show Quick Links

Table of Contents