Axis 2420 User Manual page 18

AXIS 2420 User's Manual
Refining the Dial-Up Networking Properties
Having created the Dial-Up connection for your AXIS 2420, follow the steps below to
refine the connection properties:
From the Dial-Up Networking dialog, right click the dedicated
Dial-Up connection previously created for your AXIS 2420 (Axis-
Camera was the connection created used in this and previous
examples). Select Properties.
Click the Server Types tab. From the
drop-down list, select PPP as the Type of
Dial-Up Server.
In the Advanced options field, check
Enable software compression. All other
checkboxes should remain unchecked.
In the Allowed network protocols
field, check the TCP/IP checkbox. Net-
BEUI and IPX/SPX checkboxes should
remain unchecked.
Initiating the Dial-Up Connection
Important!
Please ensure that the Null Modem Cable is correctly installed and that the relative connection proper-
ties are correctly configured before initiating a Dial-Up connection. Step-by-step instructions on how to
do this are provided on the preceding pages of this section.
Double-click My Computer and
then double-click the Dial-Up Net-
working icon.
Double-click the Dial-Up connec-
tion icon previously created for your
AXIS 2420 (AxisCamera in this and
previous examples).
Installing via a Modem
Click TCP/IP settings and then check
the Server assigned IP address, and Server
assigned name server addresses radio but-
tons.
Check the Use IP header compression
and Use default gateway on a remote
network checkboxes. Click OK.
Click the Scripting tab and ensure that the Start ter-
minal screen minimized checkbox is checked. Click OK
to exit Dial-Up Networking Properties.
Enter a Username and Pass-
word, using the default root and
pass respectively.
Click Connect to initiate the
Dial-Up connection.
17