1. Manuals
  2. Brands
  3. Axis Manuals
  4. Security Camera
  5. AXIS 2420 W/Lens
  6. User manual

Axis 2420 W/Lens User Manual

Axis communication w/lens network camera user's manual axis 2420, axis 2420
Hide thumbs Also See for AXIS 2420 W/Lens:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual
AXIS 2420
AXIS 2420 W/Lens
Network Camera
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Axis AXIS 2420 W/Lens

Summary of Contents for Axis AXIS 2420 W/Lens

  • Page 1 AXIS 2420 AXIS 2420 W/Lens Network Camera User’s Manual...

  • Page 2: About This Document

    About This Document This manual is intended for administrators and users of the AXIS 2420 and the AXIS 2420 W/Lens Network Camera, and is applicable for software release 2.31. Both products are referred to throughout as the AXIS 2420. This manual contains information for configuring, managing and using the product, as well as a general overview of the product functionality.

  • Page 3: Table Of Contents

    An Introduction to the AXIS 2420 ........
  • Page 4 Fixation de la caméra AXIS 2420 ........

  • Page 5: An Introduction To The Axis 2420

    All product variants are referred to throughout the manual as the AXIS 2420. Product Overview The AXIS 2420 is a digital network camera running TCP/IP. It includes all of the required networking connectivity for distributing monitored images over a secure intranet or the Internet.

  • Page 6: Features And Benefits

    Wizard and an Application Wizard, which help you towards a seamless and automated integration into your networking and application environments. Including a video output via a standard BNC connector, the AXIS 2420 also connects directly to any analog CCTV system to provide instant Plug-and-Watch integration into two parallel imaging networks - traditional analog, and modern digital.
  • Page 7 That’s why, in contrast to many inferior solutions that simply store image changes from one frame to another, the AXIS 2420 delivers up to 25/30 (PAL/NTSC) full, high-quality frames per second. Your pictures can be viewed using any standard browser and the data integrity of your recorded images is always assured.
  • Page 8 2420 remotely over a serial link, just as if it were located on your local network. You can initially set up the AXIS 2420 over the network, or use a computer connected directly to the AXIS 2420 via the supplied Null Modem cable. The AXIS 2420 is accessed using a standard Dial-up (PPP) connection.

  • Page 9: Physical Description

    Focus Assistant, as described in Using The Focus Assistant, on page 55. Important! If you are using the AXIS 2420 in an outdoor application, it must be housed in a weatherproof enclosure and must be fitted with a DC-Iris lens to automatically regulate the amount of light entering the cam- era.

  • Page 10: Rear Panel

    DC-Iris lens. Note: The power supply for your AXIS 2420 is country-specific. Please refer to the Hardware Inventory on page 11 and check that the type of power supply you are using is correct. I/O-A Connector...

  • Page 11: Mounting The Axis 2420

    The screw hole has an internal dimension of 1/4" UNC. The AXIS 2420 is also suitable for outdoor use, but it must be mounted in a weatherproof enclosure and must be equipped with a DC-Iris lens. If these conditions are not met when using the camera outdoors, the product warranty will be void.

  • Page 12: Installing On A Network

    • Easy installation - Use The AXIS IP Installer. See Using the AXIS IP Installer, on page 52. • Quick installation - Follow the instructions below to install the AXIS 2420 on an Ethernet network. Fit or replace a lens (if required). The lens is fitted by turning it in a clockwise direction.
  • Page 13 Verifying and Completing the Installation From Your Browser Important! • Upon delivery, the AXIS 2420 is configured for open access (anonymous users). The unit is supplied with one pre-configured Administrator username and password, set to root and pass, respectively. The Administrator password must be changed immediately to prevent unauthorized access to the Admin Tools and/or product images, as defined in the Security Settings.

  • Page 14: Installing Via A Modem

    Important! • Although instructions for configuring the AXIS 2420 using a null modem cable are provided below, it is recommended that (if possible) the unit is initially installed and configured over a network.
  • Page 15 Speed The telephone numbers requested in this dialog are not required for use in the logical connection to your AXIS 2420. To bypass the wizard error correction, simply enter any dummy number into the Area code, Telephone number and Country code fields.
  • Page 16 Installing via a Modem Refining the Dial-Up Networking Properties Having created the Dial-Up connection for your AXIS 2420, follow the steps below to refine the connection properties: From the Dial-Up Networking dialog, right-click the dedicated Dial-Up connection previously created for your AXIS 2420 (AxisCamera in this example).

  • Page 17: Focusing Your Camera

    Verifying the Modem Connection and Completing the Installation Having initiated your Dial-Up connection, as described above, you can quickly test the connection by accessing the AXIS 2420 from a standard browser, such as Netscape or Internet Explorer, as follows: Click the Installation Wizard to configure the AXIS 2420 for use with your chosen modem.

  • Page 18: Configuring Your Camera

    • Choosing Your Application, on page 31. Important! Javascript must be enabled in your browser for the AXIS 2420 Web-based interface to work. After installing the product, your AXIS 2420 is now attached directly to a local area network, or connected to a local PC using the supplied Null Modem Cable. You are now ready to proceed with the configuration of the unit.
  • Page 19 AXIS 2420 User’s Manual Configuring Your Camera The Installation Wizard The Installation Wizard provides a quick and easy way of defining the basic settings for your installation - as explained in the Administration Tools Overview, on page 21. Using the Installation Wizard 1.

  • Page 20: The Administration Tools

    Follow the instructions below to access the Administration Tools using a browser: 1. Start the browser and enter the name or IP address of the AXIS 2420 (or any DNS name if you are accessing the unit via the Null Modem Cable) in the location/address field.
  • Page 21 To restrict open access, simply register a single authorized user. External Configure the COM-ports on the AXIS 2420 to use modems, the AXIS 2191 Audio Module, (supplied separately) or Devices other external devices. For information on how to configure and use the audio module, please see The AXIS 2191 Audio Module, on page 38.
  • Page 22 DHCP should only be enabled if you know which IP address the AXIS 2420 will get from the DHCP server, or if your version of DHCP can update a DNS server, which then allows you to access the AXIS 2420 by name.

  • Page 23: System Security

    • View: provides the lowest level of access, which only allows the user to view images. Important! By default, the AXIS 2420 supports anonymous user access, which means that anybody on the Inter- net/intranet has access to the images (but not the Admin tools) from a browser.

  • Page 24: Motion Detection

    Configuring Your Camera Motion Detection The AXIS 2420 includes in-picture motion detection, for creating specific surveillance zones in the image area. You can create, name, and use up to 3 motion detection windows. You can also move, resize, or delete them at any time.

  • Page 25: Com-Ports, Modems And Pan-Tilt-Zoom Devices

    AXIS 2420 User’s Manual 4. Set the Size, History and Sensitivity profile sliders accordingly for the surveillance area. The sliders are described briefly below. A fuller description is provided in the on-line help. •Size - The relative size of the moving object in the motion detection window.
  • Page 26 The Modem page allows you to set your specific modem type and configure it, using the following parameters: • Disable incoming calls - use this only if you will not need to dial-in to the AXIS 2420. • Modem Type - set the brand of modem and provide a specific Initstring, if required.
  • Page 27 Installation Procedure Follow the instructions below to install a PTZ device: 1. Attach the PTZ device to the RS-232 or RS-485/422 port of the AXIS 2420 using the appropriate cable. 2. On the AXIS 2420 Home Page, click Administration Tools.
  • Page 28 Configuring Your Camera AXIS 2420 User’s Manual When using a Pan-Tilt device, the camera’s home page will show Pan and Tilt bars, as well as a drop-down list for preset positions, if this is supported. Note that the presence and appearance of some functions (e.g.
  • Page 29 3. Enter a descriptive name in the Current Position field. 4. Click Save to register the new preset position with the AXIS 2420 and then check that the entered name is included in the Preset Positions drop-down list. You can alternatively choose to save the position as a new Home position, by clicking the Save as Home button.

  • Page 30: The Factory Default Settings

    (note that this may take up to 15 seconds), then release the Control Button. When the Status Indicator displays green (which can take up to 1 minute) the AXIS 2420 will then have been reset to the original factory default settings.

  • Page 31: Choosing Your Application

    Web page hits is anticipated. Note: You can access live images from a desktop browser on your network as soon as the AXIS 2420 is physically installed on your network. Both advanced and novice users should then use the Wiz- ards to configure the chosen application.
  • Page 32 • available network bandwidth • the complexity of detail and color variation within the image Note: The AXIS 2420 is available in NTSC and PAL variants to accommodate the different power supply frequencies in the USA and Europe. Image Compression Ratios Although the file size of a JPEG-compressed image depends upon the actual content of the image, images containing great detail generally generate larger files.

  • Page 33: Modem Applications

    V.90 modems that fail to work with the product. • When the AXIS 2420 is dialing out it will obviously not be possible to dial-in to it. If you configure an interval during which the camera will not be dialing out, this will allow you to dial-in and make any necessary changes, etc.
  • Page 34 Choosing Your Application AXIS 2420 User’s Manual Picture Frequency for Modem Applications The speed of your modem link is a dominant factor in determining the frequency at which images are displayed in your browser, and an average-sized image is normally transmitted in 2-4 seconds.

  • Page 35: Installation And Configuration Overview

    Configure the AXIS 2420 to actively upload images to an FTP server/ISP, as follows: 1. Connect the AXIS 2420 to your local network, or, if no network is available, use the null modem cable to create a direct connection to a local computer. Refer to Installing on a Network, on page 12, or Installing via a Modem, on page 14.
  • Page 36 Configure the AXIS 2420 to upload Pre and/or Post Alarm images, as follows: Connect the AXIS 2420 to your local network, or, if no network is available, use the null modem cable to create a direct connection to a local computer. Refer to Installing on a Network, on page 12, or Installing via a Modem, on page 14.
  • Page 37 Configure your AXIS 2420 for viewing images over a network as follows: 1. Connect the AXIS 2420 to your local network. Refer to Installing on a Network, on page 12. 2. Open the Home Page in your browser and start the Installation Wizard. Complete the Wizard to establish the basic settings for your camera - selecting Network as your chosen method of connection in the Modem or Network dialog.

  • Page 38: The Axis 2191 Audio Module

    The AXIS 2191 Audio Module AXIS 2420 User’s Manual The AXIS 2191 Audio Module The AXIS 2191 Audio Module is an add-on device that provides audio capability to Axis network cameras. The module connects quickly and easily to the serial port of the camera and is configured and controlled via the camera’s user interface.

  • Page 39: The Front Panel

    AXIS 2420 User’s Manual The Front Panel Power Connector Power Indicator - Normally lit. The Rear Panel Volume In 3.5mm socket Level control for for connection input. Use a of external screwdriver to microphone. adjust. Int-Ext Set to Int for...

  • Page 40: Installing The Audio Module

    Configure the audio module from the camera’s administration pages, as described in the following section. AXIS 2420 User’s Manual Connect a loudspeaker to the 3.5mm socket (amplified speakers only), or to Out on the terminal block (speakers with no amplifica- tion).

  • Page 41: Configuring The Audio Module

    AXIS 2420 User’s Manual Configuring the Audio Module The network camera’s administration pages provide all the tools required for successfully configuring the AXIS 2191. From the camera’s home page, click on the link to Administration Tools. A new page containing the tools will open. To complete the configuration of your audio...

  • Page 42: Using The Audio Module With Your Camera

    Level Adjust IN/OUT Mute Checkboxes Drag sliders to adjust level. Check to mute speaker or microphone. AXIS 2420 User’s Manual NB. Exactly which controls will be visible below the image depends on the audio mode you are using. For example, the Push-to-Talk button will not be visible in Full-Duplex mode.
  • Page 43 AXIS 2420 User’s Manual The AXIS 2191 Audio Module Simplex - Talk Simplex - Talk mode means that only the web-client end of the connection can transmit audio (that is, to the AXIS 2191). This could be used, for example, to provide spoken instructions to a person seen in the network camera.
  • Page 44 Faulty power supply. Verify that you are using an AXIS PS-D power supply. Firewall protection. Check the Internet firewall with your system administrator. Default routers required. Check if you need to configure the default router settings. AXIS 2420 User’s Manual...

  • Page 45: Technical Specifications For The Axis 2191

    AXIS 2420 User’s Manual Technical Specifications for the AXIS 2191 • Operating temperature: 40-105 (5-40 • Humidity - 8-80% relative humidity. • EMC - : EN55024, EN55022, Class B and EN61000-3-3. • EMC - FCC Class A of FCC Rules and Regu- lations part 15, subpart B.
  • Page 46 The AXIS 2191 Audio Module The Audio Module to Camera Serial Cable The serial cable supplied with your AXIS 2191 is wired as shown in the table below: Pinouts for the RS-232 Port Audio Unused Camera Signal AXIS 2420 User’s Manual...

  • Page 47: Appendix A - Troubleshooting

    You must obtain a new IP address and reinstall the unit. 4. If this does not solve the problem, disconnect the AXIS 2420 from the network and run the PING command again. See the table below for an interpretation of the results.
  • Page 48 47). If the utility returns no response or similar, then this diagnosis is probably correct. In Windows, check that the IP address for your AXIS 2420 is on the same subnet as your workstation. Exactly how this is done varies from one version of Windows to another.
  • Page 49 Check the Internet firewall with your network administrator. Check if you need to configure the default router settings. Configure the AXIS 2420 to upload your video images to an FTP server or an ISP. Try limiting the number of clients, or configure the AXIS 2420 to upload your video images to an FTP server or an ISP.
  • Page 50 Assistant, as described in Lenses and Advanced Focusing, on page ActiveX disabled. If you are using Microsoft Internet Explorer, ensure that ActiveX has not been disabled. Java disabled. If using the Java Applet for viewing images, check that Java is enabled in your browser. AXIS 2420 User’s Manual...

  • Page 51: Appendix B - Other Ip Setup Methods

    Notes: •Do not use the default IP address featured in these examples when installing your AXIS 2420. If in doubt, consult your network administrator to obtain an unused IP address. •Make sure the AXIS 2420 is powered up and attached to the network.

  • Page 52: Using The Axis Ip Installer

    1. Run the AXIS IP Installer from the Start menu. The following window will appear: 2. Restart your AXIS 2420. 3. Select the serial number of your AXIS 2420 in the list. The serial number is identical to the unit’s Ethernet address.

  • Page 53: Notes For Macintosh Users

    Other IP Setup Methods Notes for Macintosh Users The AXIS 2420 supports TCP/IP over Ethernet, or PPP Modem dial-up. You must use TCP/IP on your Macintosh network, as there is no support for AppleTalk. When using the AXIS 2420 on a Macintosh, please observe the following points: •...

  • Page 54: Appendix C - Lenses And Advanced Focusing

    Fitting a Lens Note: The AXIS 2420 is equipped with a CS-mount, so any standard CS lens can be fitted directly. To mount a C-type lens, a CS-C adapter must also be used. The adapter effectively moves the lens 5mm away from the camera’s CCD.

  • Page 55: Direct Focusing In Your Browser

    With the Focus Assistant enabled, the Status Indicator displays Green when the camera is focused - which means you can conveniently focus the AXIS 2420 without having to monitor the images in a desktop browser. Focusing Quality The table below show the full range of colors displayed by the Status Indicator when the Focus Assistant is enabled;...
  • Page 56 Do not press the Control Button for at least 10 seconds after powering up the unit, as this will cause the AXIS 2420 to return to its factory default settings. 1. Power up the AXIS 2420 and then wait at least 10 seconds. 2. Turn the lens to its extreme Far-focus (F, 3.
  • Page 57 • select anything other than DC-Iris in the Exposure Control settings of the Image - Advanced page. Axis consequently advises extreme caution when changing the lens and/or when using the Advanced settings. Damage caused to the AXIS 2420 through overexposure to direct sunlight or halogen light is not covered under the product warranty.
  • Page 58 Gain Adjust the gain to suit the average level of light at your point of installation. The AXIS 2420 should be set to a corresponding higher level of Gain if your camera is normally monitoring an area at night, or is situated in a dark room or cupboard.

  • Page 59: Adjusting The Back Focus

    AXIS 2420 User’s Manual Adjusting the Back Focus Your AXIS 2420 is supplied with the back focus roughly set to accommodate a reasonable level of focus throughout the complete focusing range. However, if you are dissatisfied with the quality of focusing at a specific plane (or at several planes) within the focusing range, you may need to make some fine adjustments to the back focusing of the lens.

  • Page 60: Appendix D - Customizing Your Camera

    • When attempting to modify the product, you may inadvertently create a problem that will require you to return the AXIS 2420 to its factory default settings. At worst, you may even cause permanent damage to the unit that renders it unusable. Consequently, Axis strongly recommends that inexperi- enced users DO NOT modify the file system.
  • Page 61 Caution! Adding a new Web page to your AXIS 2420 is not something that should be undertaken lightly. Remem- ber: Axis does not support the personalization of product Web pages and strongly recommends that inexperienced users DO NOT perform such modifications.
  • Page 62 7. After making these changes, you will not be able to automatically access the default index page. Instead you must type in the complete URL to access it: http://IP-address/view/index.html file, by typing: directory and redirect access to it. Replace the edited command. AXIS 2420 User’s Manual file stored in the index.html boa.conf Document Root...

  • Page 63: Appendix E - Updating The Firmware

    AXIS 2420 User’s Manual Appendix E - Updating the Firmware The AXIS 2420 camera firmware is stored in Flash memory. This memory is provided by a silicon chip that, just like any other ROM device, retains data content even after power is removed.

  • Page 64: Appendix F - The Unit Connectors

    In the absence of a local network connection, a single 9-pin D-sub connector provides a dedicated physical interface for connecting a modem or computer to the AXIS 2420. This RS-232 interface supports modem speeds of up to 115kbps and effectively allows the AXIS 2420 to operate as a standalone unit independent of any computer network.

  • Page 65: Schematic Diagram

    4-pole I/O-A Connector provides the interface for a single digital input. Connected to a switch or other external security device, an image is recorded every time the switch is activated. It also provides an auxiliary DC power input or output for the AXIS 2420. Pinout Information Function Digital Input - Photocoupled Cathode (-) As below.
  • Page 66 RS-485/422 - B (inverting) A half-duplex RS-485/422 interface for controlling auxiliary equipment. RS-485/422 - A (non-inverting) Schematic diagram - showing possible application I/O-B Relay Switch 24V DC RS-485/422 B RS-485/422 A AXIS 2420 User’s Manual Optional Relay Switch Appliance Mains Power External Device...

  • Page 67: The Bnc Video Output

    AXIS 2420 User’s Manual The DC-Iris Connector The AXIS 2420 can be used with any standard C/CS lens. With full support for standard DC-Iris lenses, the camera will automatically regulate the amount of light entering the camera. The DC-Iris Connector provides the power and control signalling required for a DC-Iris lens.

  • Page 68: Relay Output

    The Unit Connectors This requires you to have root access to the AXIS 2420 and consequently, to supply a user name and password. Login as root and supply the root password (default = pass). Tip! Developers wishing to create applications incorporating sophisticated alarm conditioning using the relay output and digital input are encouraged to read the Camera API, HTTP-Interface Specification, available from the Axis Web at www.axis.com.

  • Page 69: Appendix G - High-Speed Services

    Ideally your ISP (Internet Service Provider) should supply you with several external, static IP addresses - in which case you can assign any one of these to your AXIS 2420 to make it fully accessible over the internet. If your ISP supplies you with only one IP number - which is usually the case - then this IP number is normally assigned to your PC.

  • Page 70: Appendix H - Technical Specifications

    Technical Specifications AXIS 2420 User’s Manual Appendix H - Technical Specifications The AXIS 2420 uses the standard Internet TCP/IP suite of protocols System Requirements - and can be used with most operating systems: Windows, Linux, UNIX, Mac and several others. The only software required is Microsoft Internet Explorer 4.x/5.x or Netscape 4.x.
  • Page 71 Axis’ own ETRAX-100LX 32-bit RISC processor, which is streamlined and optimized for device connectivity to networks, independent of any other network resource. The AXIS 2420 uses the industry's first dedicated network digital video surveillance compression chip - the AXIS ARTPEC-1.

  • Page 72: Physische Beschreibung

    Fokussierung zu aktivieren, wie unter Using The Focus Assistant auf Seite 55 ausgeführt. Wichtig! Wenn Sie Ihre AXIS 2420 im Freien einsetzen möchten, muss sie sich in einem Outdoor-Gehäuse befinden und mit einem DC-Iris-Objektiv ausgestattet sein, um automatisch den Lichteinfall in die Kamera zu regulieren. Das ladungsgekoppelte Bauelement nimmt Schaden, wenn es länger direkt von Sonnen- oder Halogenlicht bestrahlt...

  • Page 73: Bedienfeld Hinten

    DC-Iris-Standardobjektiv erforderlich sind, sofern Sie eines verwenden möchten. Hinweis Das mit der AXIS 2420 ausgelieferte Netzkabel ist landesspezifisch. Überprüfen Sie bitte unter “Lieferumfang” auf Seite 74, dass Sie das richtige Netzteil verwenden. Physische Beschreibung E/A-A-Anschluss Der Anschluss ist die physische Schnittstelle zu einem mit Digitalkamera gekoppelten Eingabegerät, das das Anschließen einer...

  • Page 74: Montage Der Axis 2420

    Das Schraubloch hat einen inneren Durchmesser von 1/4 Zoll UNC (Grobgewinde). Überprüfen des Lieferumfangs Überprüfen Sie die mit der AXIS 2420 gelieferten Teile anhand der Liste unten und wenden Sie sich an Ihren Händler, wenn etwas fehlen sollte oder beschädigt ist.

  • Page 75: Installieren In Einem Netzwerk

    • Einfach Installation mit dem AXIS IP Installer. Lesen Sie Using the AXIS IP Installer auf Seite 52. • Schnelle Installation - Befolgen Sie die nachfolgenden Anweisungen. Setzen Sie die gewünschle Linse in die AXIS 2420 ein. Die Linse raslet ein, indem Sie sie im Uhrzeigerfinn hineindrehen.
  • Page 76 Wichtig! • Bei Lieferung ist die AXIS 2420 auf offenen Zugriff eingestellt (anonyme Benutzer). Das Gerät wird mit vorkon- figuriertem Benutzernamen und Kennwort geliefert, die auf "root" und "pass" eingestellt sind. Der Benutzer- name muss sofort geändert werden, um nicht-autorisierten Zugriff auf Admin Tools und/oder Bilder zu verhindern, wie in den Sicherheitseinstellungen definiert.

  • Page 77: Anschließen An Ein Modem

    Bilder über eine herkömmliche DFÜ-Verbindung zu übertragen. Wichtig! • Obwohl im Folgenden die Konfiguration des AXIS 2420 über ein Null-Modemkabel beschrieben wird, wird emp- fohlen (falls möglich), das Gerät zuerst über ein Ethernet-Netzwerk zu installieren und zu konfigurieren. •...
  • Page 78 Verbindung ein (AxisCamera wird in den folgenden Beispielen als Name verwendet). Stellen Sie die Maximale Geschwindigkeit auf 115200 ein, um die Leistung der AXIS 2420 bei Verwendung eines Null-Modem- kabels deutlich zu erhöhen. Klicken Sie auf “OK”, um zum Dialogfeld Neue Verbind- ung zurückzukehren.
  • Page 79 AXIS 2420 User’s Manual Feinabstimmung der DFÜ-Netzwerkeigenschaften Nachdem Sie die DFÜ-Verbindung für Ihre AXIS 2420 erstellt haben, führen Sie die folgenden Schritte aus, um eine Feinabstimmung der Verbindungseigenschaften vorzunehmen: Klicken Sie im Dialogfeld “DFÜ-Netzwerk” mit der rechten Maustaste auf die DFÜ-Verbindung, die Sie zuvor für Ihren AXIS 2420 erstellt haben (AxisCamera ist die in den vorangehenden Beispielen erstellte Verbindung).

  • Page 80: Scharfeinstellung Der Kamera

    Scharfeinstellung der Kamera Wenn Sie Ihre Videobilder vom gewählten Installationspunkt aus nicht sehen können, befolgen Sie die folgenden Anleitungen, um eine gute Basis-Scharfeinstellung Ihrer AXIS 2420 zu erzielen: Schalten Sie die AXIS 2420 ein, und warten Sie mindestens 10 Sekunden.

  • Page 81: Werkseitige Standardeinstellungen

    3. Halten Sie die Kontroll-Taste gedrückt, bis die Statusanzeige gelb leuchtet (dies kann bis zu 15 Sekunden dauern). Lassen Sie die Kontroll-Taste los. Die Statusanzeige leuchtet nach max. 1 Minute grün, und in der AXIS 2420 sind jetzt wieder die werkseitigen Standardeinstellungen geladen.

  • Page 82: Description Du Materiel

    état d’unité correct. • rouge - le voyant ne s’affiche en rouge qu’en cas de problème de la caméra AXIS 2420. Reportez-vous à la section Appendix A - Troubleshooting. Remarque : L'indicateur d'état peut aussi clignoter lorsqu'une image est prise. Veuillez consulter l'aide en ligne pour plus d'informations.

  • Page 83: Panneau Arrière

    Remarque: Le bloc d’alimentation fourni avec votre caméra AXIS 2420 est propre à chaque pays. Reportez-vous à la liste du matériel à la page 84 et assurez-vous que vous utilisez le type de source d’alimentation approprié.

  • Page 84: Fixation De La Caméra Axis 2420

    Vérification de la liste du matériel Fixation de la caméra AXIS 2420 La caméra AXIS 2420 est livrée sans support de montage, ni pied. Des trous de vis permettant de fixer la caméra sont fournis à la fois sur les surfaces supérieures et inférieures de l’unité, pour une installation facile sur un mur ou encore au plafond.

  • Page 85: Installation Sur Un Réseau

    • Macintosh - Veuillez vous référez à Notes for Macintosh Users à la page 53. • Installation simple - Utilisez l'AXIS IP Installer. Voir Using the AXIS IP Installer à la page 52. • Installation rapide - Utilisez le guide ci-dessous pour installer rapidement votre serveur AXIS 2420 dans un réseau Ethernet: Installez l'objectif de votre choix sur l'AXIS 2420.
  • Page 86 à configurer votre application. Important! • A la livraison, l'AXIS 2420 est configuré en accès libre (utilisateurs anonymes). L'unité est livrée avec un nom et mot de passe d'administrateur préconfigurés, definis respectivement par root et pass. Le mot de passe de l'administrateur doit être modifié immédiatement pour éviter des accès non- autorisés aux outils d'administration et/ou aux images, comme défini dans les paramètres e sécurité.

  • Page 87: Installation Par L'intermédiaire D'un Modem

    Important! • Bien que les instructions de configuration du serveur AXIS 2420 à l’aide d’un câble null modem soient fournies ci-des- sous, nous vous conseillons, dans la mesure du possible, d’installer et de configurer initialement l’unité par l’intermédi- aire d’un réseau Ethernet.
  • Page 88 Modem, réglez la Vitesse maxi- male sur 115200. Vous avez maintenant terminé la créa- tion de la connexion d’accès réseau à dis- tance dédiée de votre AXIS 2420. Cliquez sur Terminer. Double-cliquez sur l’icône Nouvelle connexion. Donnez un nom à la connexion (les exemples qui suivent utilisent le nom AxisCamera).
  • Page 89 AXIS 2420 User’s Manual Paramétrage des propriétés de l’accès réseau à distance Une fois la connexion d’accès réseau à distance de votre serveur AXIS 2420 créée, suivez les étapes ci-dessous pour affiner les propriétés de la connexion : Dans la boîte de dialogue Accès réseau à distance, cliquez avec le bouton droit sur la connexion d’accès réseau à...

  • Page 90: Mise Au Point De Votre Caméra

    Après avoir lancé votre connexion d’accès à distance, comme cela est décrit ci-dessus, vous pouvez rapidement vérifier l’intégrité de la connexion en accédant à votre serveur AXIS 2420 à partir d’un navigateur Web standard, tel que Netscape (4.x) ou Internet Explorer (4.x/5.x): Cliquez sur le bouton Assistant d’installation (ou utilisez les...

  • Page 91: Restauration Des Paramètres D'usine Par Défaut

    Dans certaines circonstances, il peut être nécessaire de restaurer les paramètres par défaut (Factory Default) de votre caméra AXIS 2420. Pour cela, cliquez sur le bouton approprié dans la fenêtre Administration Tools, ou appuyez sur le bouton Control. Suivez les instructions ci-dessous pour restaurer les valeurs d'usine par défaut des paramètres de...

  • Page 92: Descripción Física

    Using The Focus Assistant, en la página 55. ¡Importante! Si está utilizando la AXIS 2420 en una aplicación al aire libre, debe guardarla en una caja resistente a la intemperie y equiparse con una lente DC-Iris para regular automáticamente la cantidad de luz que entra en la cámara.

  • Page 93: Panel Posterior

    Nota: La fuente de alimentación que se ofrece con su AXIS 2420 depende del país. Remítase al Inventario de hardware en la página 94 y compruebe que esta utilizando el tipo correcto de fuente de alimentación.

  • Page 94: Montar La Axis 2420

    Comprobar el inventario de hardware Montar la AXIS 2420 La AXIS 2420 se suministra sin una base o ensamblaje de montaje. En las superficies superior e inferior de la unidad hay agujeros roscados para sujetar la cámara a un ensamblaje, para instalarla fácilmente en una pared o en un techo.

  • Page 95: Instalación De La Cámara A Una Red

    • Instalación sencilla - Utilize AXIS IP Installer. Consulte Using the AXIS IP Installer en la página 52. • Instalación rápida - Siga las instrucciones debajo para instalar la AXIS 2420 en una red Ethernet. Monte su lente preferida en la AXIS 2420. Fije su lente rotandola en dirección a favor del reloj.
  • Page 96 Verificando la instalación desde su buscador ¡Importante! • Para su venta, AXIS 2420 esta configurada para ser públicamente accedida (usando 'anonymous' ). La unidad también esta configurada para poder acceder a ella como Administrador, usando el nombre de usuario y la contraseña 'root' y 'pass' respectivamente. La contraseña del Administrador debe de ser cambiada inmediatamente para prevenir el acceso sin autorización a la administración y a las...

  • Page 97: Instalación De La Cámara A Un Módem

    ¡Importante! • Aunque las instrucciones para configurar la AXIS 2420 usando un cable de módem nulo aparecen a continu- ación, se recomienda que (si es posible) la unidad se instale y configure inicialmente sobre una red Ethernet. •...
  • Page 98 Los números de teléfono solicitados en este diálogo no son necesarios para ser utilizados en la conexión lógica a su AXIS 2420. Para evi- tar la corrección del error de asistente, sólo tiene que entrar cualquier número falso en los campos Código del área, Número de teléfono y...
  • Page 99 AXIS 2420 User’s Manual Configuración de las propiedades de acceso telefónico a redes Una vez creada la conexión con marcación directa para su AXIS 2420, siga los siguientes pasos para configurar las propiedades de conexión: Desde el diálogo de acceso telefónico a redes, haga clic con el botón de la derecha en la conexión con marcación directa creada anteriormente...

  • Page 100: Enfocando La Cámara

    Habiendo iniciado la conexión con marcación directa tal como se describe arriba, puede verificar rápidamente la integridad de la conexión accediendo a la AXIS 2420 usando un buscador de web estándar, como Netscape o Internet Explorer de la siguiente forma: Enfocando la cámara...

  • Page 101: Incluir Los Parámetros Por Defecto

    En algunas circunstancias, puede ser necesario volver a incluir los Parámetros de fábrica por defecto para su AXIS 2420. Esto se realiza haciendo clic en el botón adecuado en Herramientas de administración o pulsando el botón Control. Siga las siguientes instrucciones para volver a incluir los parámetros del producto de fábrica por defecto...

  • Page 102: Index

    DC-Iris Connector 10, 67 DC-Iris Settings 57 DHCP 22 Dial-in - access rights 23 Dial-up Networking 15 Digital Input 68 AXIS 2420 User’s Manual Direct Focusing 55 Ethernet 5 Ethernet address 51 ETRAX 100 LX 7 Exposure Control 58 Factory Default Settings 30...
  • Page 103 AXIS 2420 User’s Manual Motion Detection 24 Mounting the unit 11 Network Address Translation (NAT) 69 Network Connector 10 Network Indicator 10 Network installation 12 Null Modem Cable 14 Other IP setup methods 51 Pan/Tilt/Zoom devices 25, 27 Picture frequency 32...

Table of Contents