Floppy Disk Drive Problems; Hardware Device Problems - AIRIS Pragma N890 User Manual

Simultaneous display/multi-display does not work.
Make sure that you turn on the external monitor before turning on the
computer.
Press +
Fn F5
settings in Display Properties in Windows.

Floppy Disk Drive Problems

The disk drive does not work.
Make sure that the disk drive is properly connected.
The Floppy Disk Drive In-use Indicator stays on.
Make sure that the floppy disk is not physically damaged.
Make sure that the floppy disk is inserted correctly.
The disk drive cannot write to a floppy disk.
Make sure that the floppy disk is formatted.
Make sure that the floppy disk is not write-protected.
Make sure that you are writing to the correct drive.
Make sure that there is enough space left on the floppy disk.
Make sure that the floppy disk is not physically damaged.
The disk drive cannot read a floppy disk.
Make sure that the floppy disk is formatted.
Make sure that you are reading the correct drive.

Hardware Device Problems

The computer does not recognize a newly installed device.
The device may not be correctly configured in the SCU program. Run
the SCU program to identify the new type.
Troubleshooting
to toggle through the display options or change the
8-7