Inserting And Ejecting Floppy Disks - AIRIS Pragma N890 User Manual

NOTES:
Depending on your model, there may be a core on the floppy disk drive cable.
Do not put the floppy disk drive upside down.
Do not put the AC adapter on the floppy disk drive.

Inserting and Ejecting Floppy Disks

To insert a floppy disk, hold it with the arrow facing up and towards the
drive. Slide the disk into the drive until it clicks into place.
To eject a floppy disk, first ensure that the floppy disk drive is not
working, and then press the eject button on the drive. When the floppy
disk pops out of the drive, remove the floppy disk and store it properly.
CAUTION:
Never turn off or reset the computer while the floppy disk drive is working.
Always store your floppy disks in a safe, clean container, to protect them from the
environment and magnetic fields.
A floppy disk must be formatted before you can use it. (To know how to format a
floppy disk, see your operating system manual.)
2-14
Eject Button
In-use Indicator
Operating Your Computer