Software Problems; Sound Problems - AIRIS Pragma N890 User Manual

Make sure that the Standby or Hibernation time-out is enabled.
The computer does not enter Standby or Hibernation mode
immediately.
If the computer is performing an operation, it normally waits for the
operation to finish.
The computer does not resume from Standby or Hibernation mode.
The computer automatically enters Standby or Hibernation mode
when the battery pack is empty. Do any one of the following:
− Connect the AC adapter to the computer.
− Replace the empty battery pack with a fully charged one.
The computer does not enter Hibernation mode with the
keys.
Make sure that the Hibernation function is specified for the sleep
button.
You might be using a PC card that prevents the computer from
entering Hibernation mode. To enter the mode, stop the
communication program and then remove the card or stop the card.

Software Problems

An application program does not work correctly.
Make sure that the software is correctly installed.
If an error message appears on the screen, consult the software
program's documentation for further information.
If you are sure the operation has stop, reset the computer. (See
"Resetting the Computer" later in this chapter.)

Sound Problems

No sound is produced.
Make sure that the volume control is not set too low.
8-12
Fn F12
+ hot
Troubleshooting