When And How To Use Bios Setup; When To Use; Starting Bios Setup - AIRIS Pragma N890 User Manual

When and How to Use BIOS Setup

When to Use

You need to run SCU when:
You see an error message on the screen requesting you to run SCU.
You want to restore the factory default settings.
You want to modify some specific settings according to the hardware.
You want to modify some specific settings to optimize system
performance.

Starting BIOS Setup

NOTES:
The SCU screens shown in this chapter are for your reference only. The actual
items or settings on your computer may differ.
The SCU program may have been updated after the publication of this manual.
The settings you select in your operating system might override similar settings in
SCU.
To run SCU, press
system startup. The prompt shows up on the screen for only a few
seconds. You must press
shown next.
5-2
when the prompt appears on the screen during
F2
quickly. The SCU main screen appears as
F2
Using BIOS Setup